Sinotruk Howo 4×4 rigid truck with 12.2m reach crane Exw China
Sinotruk Howo 4×4 rigid truck with 12.2m reach crane Exw China
$62,330.00
| HOWO 300Hp 4×4 Lorry Truck with crane | |
| Specifications | |
| Engine: | Engine brand:Weichai Engine model: WP10.300E22
Engine type: Diesel 4-stroke direct injection engine, 6-cylinder in-line with water cooling, turbo-charging & inter-cooling Rated power: 219kw Horse power:300hp Emission standard: Euro II Displacement:9.726 liters |
| Clutch | Single-plate dry coil-spring clutch,hydraulically operating with air assistance |
|
Transmission |
Gear box:HW15710C(10Speeds)with HW70 PTO Transmission Type: Manual
10 forward gears 2 reverse gears |
| Front Axle | STR steering driving alxe |
| Driving axle (rear axle) | ST16
Single driving axle 16 ton permissible load, ratio:5.73 |
| Steering | Right hand drive |
| Braking System | Service brake: dual circuit compressed air brake |
| Parking brake(emergency brake):spring energy, compressed air operating on rear wheels
Auxiliary brake: engine exhaust valve brake |
||
| Tyres | 12.00R20 Radial tyre,6+1 spare | |
| Fuel tanker | 400L fuel tank | |
| Cab | Howo 76 cabin, flat roof, single sleeper with air-conditioner | |
| Electrical System | Operating voltage:24V,negative grounded Starter:24V.7.5Kw | |
|
Dimensions in mm |
Wheel base Overall length Overall width Overall height | 4600
7300 2550 4000 |
| Bucket size L*W*H (mm) | 4000x2300x600mm | |
| Weight in kg | Dead weight | 9200 |
| Crane | XCMG SQZ105A with folding arm | 5 tons |
一、主要技术参数 Main technical parameters
1、产品主体性能参数 Product parameters
| 项目 Items | 单位 Unit | G SQZ105.4 |
| 最大起重力矩
Max lifting moment |
kN•m | 105 |
| 最大起升质量
Max lifting capacity |
kg | 5000 |
| 最大伸臂长度
Max boom length |
m | 12.2 |
| 最大起升高度
Max lifting height |
m | 14.5 |
| 变幅范围
Amplitude range |
° | 0～75° |
| 回转角度
Slewing angel |
° | 420° |
| 支腿跨距
Stabilizer spread |
mm | 5607 |
| 产品自重
Dead weight |
Kg | 2046 |
2、液压系统参数 Hydraulic system parameters
| 参数项目 Items | 单位 Unit | 参数 Parameters |
| 系统额定流量Rated flow of hydraulic system | L/min | 25 |
| 额定工作压力
Rated working pressure |
MPa | 28 |
| 推荐功率
Recommended power |
kW | 18 |
| 环境油温范围
Circumstance temperature range of hydraulic oil |
OC |
-25 OC-+40 OC |
| 液压油箱容积
Volume of hydraulic oil tank |
L | 100 |
二、主要特点简介 Main features
1、新六边形臂体截面，同等幅度下起重能力更大，截面抗弯扭能力强。
The new hexagonal arm body section, the same range of the lifting capacity is greater, section bending resistance ability.
2、采用齿条缸驱动回转，回转平稳有力，便于维修保养，回转角度可达 420°。
Using the rack cylinder drive rotation, rotation is smooth and powerful, easy maintenance, rotation Angle up to 420°.
3、双腔大跨距支腿结构，作业稳定性更好。
Double cavity large span leg structure, better operation stability. 4、采用有限元进行产品结构优化设计，整机自重更轻。
Finite element is used to optimize the product structure design, and the whole machine weight is lighter
5、等力矩设计，起重性能更强。
Equal torque design, the lifting performance is stronger.
6、标配 L-HM(CY)徐工专用宽温液压油，可以实现冬季夏季通用。
L-HM(CY) wide temperature hydraulic oil is designed for XCMG specially, which can be widely used in winter and summer.
Extra Features
- Secure Payments
- Satisfaction Guarantee
- Worldwide Shipping
Sinotruk Howo 4×4 rigid truck with 12.2m reach crane
03.06.2024
Overview
The Technical Parameter and Standard Instruction
Type: Lorry truck with XCMG crane Traction Type:4×4
Engine brand:Weichai (300hp) Drive Type:Right Hand Drive Brand: Howo (Sinotruk)
Price:USD $ 62,330.00 /ONE UNIT FOB PORT QINGDAO CHINA
Overall dimension:around 75cbm
Optional: +$140 for light security grills
Production time:30 days after receiving 30% deposit by T/T
Payment: 30% deposit by T/T pre production and 70% balance by T/T pre shipment
Shipment: by vessel
Validity of the pricelist: 20 days
Description
| HOWO 300Hp 4×4 Lorry Truck with crane | |
| Specifications | |
| Engine: | Engine brand:Weichai Engine model: WP10.300E22
Engine type: Diesel 4-stroke direct injection engine, 6-cylinder in-line with water cooling, turbo-charging & inter-cooling Rated power: 219kw Horse power:300hp Emission standard: Euro II Displacement:9.726 liters |
| Clutch | Single-plate dry coil-spring clutch,hydraulically operating with air assistance |
|
Transmission |
Gear box:HW15710C(10Speeds)with HW70 PTO Transmission Type: Manual
10 forward gears 2 reverse gears |
| Front Axle | STR steering driving alxe |
| Driving axle (rear axle) | ST16
Single driving axle 16 ton permissible load, ratio:5.73 |
| Steering | Right hand drive |
| Braking System | Service brake: dual circuit compressed air brake |
| Parking brake(emergency brake):spring energy, compressed air operating on rear wheels
Auxiliary brake: engine exhaust valve brake |
||
| Tyres | 12.00R20 Radial tyre,6+1 spare | |
| Fuel tanker | 400L fuel tank | |
| Cab | Howo 76 cabin, flat roof, single sleeper with air-conditioner | |
| Electrical System | Operating voltage:24V,negative grounded Starter:24V.7.5Kw | |
|
Dimensions in mm |
Wheel base Overall length Overall width Overall height | 4600
7300 2550 4000 |
| Bucket size L*W*H (mm) | 4000x2300x600mm | |
| Weight in kg | Dead weight | 9200 |
| Crane | XCMG SQZ105A with folding arm | 5 tons |
主要技术参数 Main technical parameters
1、产品主体性能参数 Product parameters
| 项目 Items | 单位 Unit | G SQZ105.4 |
| 最大起重力矩
Max lifting moment |
kN•m | 105 |
| 最大起升质量
Max lifting capacity |
kg | 5000 |
| 最大伸臂长度
Max boom length |
m | 12.2 |
| 最大起升高度
Max lifting height |
m | 14.5 |
| 变幅范围
Amplitude range |
° | 0～75° |
| 回转角度
Slewing angel |
° | 420° |
| 支腿跨距
Stabilizer spread |
mm | 5607 |
| 产品自重
Dead weight |
Kg | 2046 |
2、液压系统参数 Hydraulic system parameters
| 参数项目 Items | 单位 Unit | 参数 Parameters |
| 系统额定流量Rated flow of hydraulic system | L/min | 25 |
| 额定工作压力
Rated working pressure |
MPa | 28 |
| 推荐功率
Recommended power |
kW | 18 |
| 环境油温范围
Circumstance temperature range of hydraulic oil |
OC |
-25 OC-+40 OC |
| 液压油箱容积
Volume of hydraulic oil tank |
L | 100 |
| 项目 Items | 单位 Unit | G SQZ105.4 |
| 最大起重力矩
Max lifting moment |
kN•m | 105 |
| 最大起升质量
Max lifting capacity |
kg | 5000 |
| 最大伸臂长度
Max boom length |
m | 12.2 |
| 最大起升高度
Max lifting height |
m | 14.5 |
| 变幅范围
Amplitude range |
° | 0～75° |
| 回转角度
Slewing angel |
° | 420° |
| 支腿跨距
Stabilizer spread |
mm | 5607 |
| 产品自重
Dead weight |
Kg | 2046 |
二、主要特点简介 Main features
1、新六边形臂体截面，同等幅度下起重能力更大，截面抗弯扭能力强。
The new hexagonal arm body section, the same range of the lifting capacity is greater, section bending resistance ability.
2、采用齿条缸驱动回转，回转平稳有力，便于维修保养，回转角度可达 420°。
Using the rack cylinder drive rotation, rotation is smooth and powerful, easy maintenance, rotation Angle up to 420°.
3、双腔大跨距支腿结构，作业稳定性更好。
Double cavity large span leg structure, better operation stability. 4、采用有限元进行产品结构优化设计，整机自重更轻。
Finite element is used to optimize the product structure design, and the whole machine weight is lighter
5、等力矩设计，起重性能更强。
Equal torque design, the lifting performance is stronger.
6、标配 L-HM(CY)徐工专用宽温液压油，可以实现冬季夏季通用。
L-HM(CY) wide temperature hydraulic oil is designed for XCMG specially, which can be widely used in winter and summer.
| New or Used | |
|---|---|
| Availability | |
| Make | |
| Location | |
| Axle Type | |
| Fuel Type | Diesel |
| Driver Side | |
| Transmission | Manual |
Be the first to review “Sinotruk Howo 4×4 rigid truck with 12.2m reach crane Exw China”
Reviews
There are no reviews yet.