LAKELAND INNOVATOR FUEL TANKER 42800L
Tank Construction and Compliance to ADR 2017 and relevant design code EN 13094 all
Welding to comply with EN 10042 level C
Capacity: 42,800 Litres useable.
Compartments: Six compartments with sizes: 7600; 7600; 7000; 7600; 6000; 7000
Litres excluding regulatory ullage allowance (3% of nominal capacity with a minimum of 150
Shell: Monocoque banded ring design constructed from 5.00mm xtral aluminium or
equivalent to meet material requirements of EN 13094
Section: Elliptical to provide optimal low C of G in compliance with ADR 126.96.36.199 –
stability and ADR 188.8.131.52 – lateral stability
Ends & Compartment: Swept front end, shaped to assist airflow and aid driver
visibility. Rear end and divisions 5.25mm aluminium dished and welded directly to extruded
stiffening rings…front and rear end design conforms to the new DFT/EU proposals regarding
end joints in EN 13094 2017 184.108.40.206
Sumps: Each compartment designed with full length sumps for complete drainage.
Manlids: Gardner Denver 500 mm dia lockable manlids bolt down type 280mb, fire
engulfment 100/20mb PV drop test approved to ADR/SLP regulations (2 x manlid keys
provided in toolbox)
Dip Mandrel: Dip mandrel for tank evacuation purposes, earthing continuity cable in each
compartment provided for the safe dissipation of electrical charge.
H.L.C.O: Gardner Denver high level cut off system with optic probes fitted to each
compartment to E.I guidelines, bottom socket fitted at nearside and interlocked to vehicle
braking system to prevent drive away with lines connected.